FIFA 19 Squad Rating Guide – Team Rating Overall

Would you like to know how is team rating overall calculated or which players you should use to complete a specific squad building challenge for the lowest price possible? Do you know what bronze benching is? Well, all these things and much more are explained in our FIFA 19 squad rating guide.

QUICK ACCESS
INTRO | FORMULA | CONSIDERATIONS | COMBINATIONS | TRICKS

FIFA 19 Squad Rating Introduction

What is the FIFA 19 squad rating?

Team rating is a quality evaluation system that allows you to compare different squads. It measures how good, supposedly, a team can be.

This measurement is made through each player’s individual rating/overall in a team (all starting eleven plus the seven substitutes). It is, then, a little subjective, because a player with the highest rating is not always the best player.

Click to maximize

How is FIFA 19 Squad Rating Calculated?

Understanding the FIFA 19 squad rating formula

The Team Rating is basically the result of the average between all 18 players’s overalls plus a correction value. This correction value is there to give different weights to the starting eleven, providing them more importance than the players that start on the bench.

The way how FIFA 19 squad rating is calculated is not well known by the FIFA players community. For this reason, we will share it with you, trying to make it as simple as we can.

In order to find out the team rating you just need to know each one of the starting eleven and substitutes’s ratings. As it was said here, the first step is to calculate the average between all these 18 players’s ratings. You just need to sum all those ratings and then divide the result by 18. Each player whose rating is superior to the average contributes positively to the correction factor with the difference between these two numbers. For the substitutes, this factor is divided by two.

This is the general formula used to calculate the FIFA 19 Squad Rating:

SR = ( SUM + CF ) / 18

in which
SR is the FIFA 19 Squad Rating
SUM is the Rating’s Sum of the 18 players
CF is the Correction Factor

The Correction Factor CF is calculated in this way:

CF = (IR1 – AR) + … + (IR11 – AR) + (IR12 – AR)/2 + … + (IR18 – AR)/2

in which
CF is the Correction Factor
AR is the Average Rating of the 18 players (not rounded)
IRn is the Individual Rating of the player number n

Remember that, only players with ratings higher than the AR can be used to calculate the CF.

Do you still have questions about how this new calculation is made? That’s natural. We will resume it in six steps:

1 Sum up the ratings of the 18 players;
2 Divide by 18 to get the average per player (do not round it);
3 For every player above the average calculate by how much they are above the average and sum this up (do not round it);
4 Add the value you got in the previous step to the one you got in step 1;
5 Round it to the nearest digit and divide it by 18;
6 Round down to get the final FIFA 19 squad rating by the formula.

Click to maximize

To make the things easier, we will look to an example of a Premier League squad without substitutes, just like it happens on Squad Building Challenges. We suggest to use this guide or the EA’s concept squad building when you want to test team ratings.

Consider the team shown on the image above. The starting eleven’s ratings are: 83, 82, 81, 80, 75, 82, 80, 76, 77, 78 and 78.

STEP 1 – SUM UP THE RATINGS
This is extremely easy. Add up all these numbers together and you’ll get 872.

STEP 2 – GET THE AVERAGE BY PLAYER
Divide it by 11, then you get 79.27.

STEP 3 – CALCULATE THE CF
The correction factor equals the difference between each player’s rating and the average you got at step 2. When a player’s rating is equal or lower than the average, like it happens in this case with Sissoko, we assume that the difference between them is zero.
Therefore, CF = ((83-79.27)+(82-79.27)+(81-79.27)+(80-79.27)+(82-79.27)+(80-79.27)) = 12.36.

STEP 4 – ADD THE CF TO THE SUM
Then, you add up the values obtained at steps 1 and 3: 872 + 12.36 = 884.36,36

STEP 5 – ROUND IT AND DIVIDE IT
Then, you divide 884 by 11: 884/11 = 80.36.

STEP 6 – ROUND DOWN
80.36 -> 80. That’s the final squad rating.

FIFA 19 Squad Rating Considerations

What affects the FIFA 19 squad rating?

For those who are not very good at math, we gathered here some conclusions you can get from the FIFA 19 Squad Rating calculation in order to tear down a few myths.

✔️ The FIFA 19 Squad Rating will never be inferior to the simple average between all the 18 players’s ratings because the correction factor is always positive;
 
✔️ The starting eleven’s ratings weigh more over the Team Rating;
 
✔️ The correction factor raises as the difference between ratings gets bigger;
 
✔️ The Team Rating does not depend on the reserves;
 
✔️ The Team Rating does not depend on the players or team’s chemistry;
 
✔️ The Team Rating will not vary if a player card is regular or IF as long as they have the same rating;
 
✔️ When you add a better player to your squad, it is guaranteed that the team rating will not drop.

FIFA 19 Squad Rating Combinations

How to meet the SBCs requirements?

The FIFA 19 Squad Rating Combinations are too long to be published on this page.
If you want to know the combinations available, please click here.

FIFA 19 Squad Rating Tips & Bronze Benching

How to play against weaker opponents?

Star Rating, which gets its results from the FIFA 19 Squad Rating, is important for matchmaking. This is the game system responsible for finding your team a fair opponent. One of the considered factors is the Star Rating. Pairing two players who have a similar team value is its role. If you don’t like to play against strong teams, then you just have to artificially lower your Star Rating to the minimum possible without having to lose any players you intend to use. If you already learned how to calculate the Team Rating, then we don’t need to go any further.

There is an excellent trick that will help you to find potentially weaker opponents. Do you want some help? OK. Go to the auctions market and buy 7 low-rated players. The lower, the better. Have you ever realized why unpopular players like Shandon Baptiste and Josef Hefele are so expensive? That’s because they are some of the lowest-rated players of the game, and many people are already using this trick. You don’t have to buy these ones because they are too expensive, but try to buy players with the lowest overall rating possible. Place them on the bench and play with your best starting eleven. If you feel like you need to place better players on the bench, do it, but know that because of this you’ll be facing an opponent with a stronger team.

This trick is also known by bronze benching. It is usually implemented by players with very high rated squads in order to bring down the total overall rating. These players have their own reasons to do it: some believe there is a handicap when it comes to the overall squad rating; others believe they get matched up against similarly rated squads.

Despite being very useful for many players, this trick has its disadvantages. One is that most of the times, opponents who have weaker teams end up being tougher. A loss in these situations may demoralize a player, making him weaker for the next matches. Another disadvantage is all the work you have to go through in order to reorganize the team. Searching your club for other players will be frequent because of potential player injuries and suspensions. Besides that, there’s that obvious disadvantage of not being able to make good substitutions in a match. Finally, if your connection isn’t very good you may end up facing a player with a better star rating than yours.

If you’re aware of this method, know that it’s possible to reach considerable star rating changes for your team. We tested adding the seven lowest-rated players of FIFA 19 Ultimate Team to the starting eleven we used above to show how the team rating is calculated. The result was an impressive team rating decrease from 80 to 74, which means that the star rating also changed from 4.5 to 3.5 stars.

Click to maximize